Tamiya 47480 1/10 Electric RC Car Special Planning No.180 M-08R Chassis Kit, Electric Radio Control

(Rear wheel drive chassis incorporated with instant force parts that are effective in racing) The rear wheel drive chassis M-08 is equipped with carefully selected parts that are effective in racing, by mounting the motor to the rear with a middle ship mount to balance the traction and stability of the drive wheels. The drive system is equipped with a ball different, and the drive shaft is universal. In addition, the low friction cross spider and lightweight aluminum swing shaft are combined with the wheel hub is made of clamp type aluminum with 0.2 inch (5 mm) thick. The legs are used with a wide range of turnbuckle shafts for the susarms and steering systems, and the titanium coated sass shafts are also used. The M Chassis Big Bore Aluminum Damper Plus attaches to carbon damper stays is a special product with blue anodized finish on the top and bottom. In addition, the 20g chassis weight is also included, so it is balanced in weight. Of course, it is also attractive at a reasonable price rather than having to collect the parts separately. This is a high potential chassis kit that you will enjoy racing. Main Equipment Parts: Drive System: Full Bearing Specifications, Ball Def (52T) Set, 33mm Lightweight Aluminum Swing Shaft, Cross Spider for LF Assembly Universal, 06 Fusso Hardcoated Aluminum Pinion (20T), M-08 CONCEPT Aluminum Shaft Set, M Chassis Reinforced Freewheel Axle Set, Clamp On Aluminum Wheel Hub (5mm Thickness) [Around the feet] Carbon Damper Stays (Front/Rear), Reinforced D Parts (Sassing Arm), Various Aluminum Turnbuckle Shafts, Various Titanium Coated Sassis Shafts, 5 x 5 mm Hard Hex Pillow Ball, M Chassis Big Bore Aluminum Damper Plus (Blue Cap Specification), 0.05 x 0.4 inch (5 x 11 mm) Hard Hex Pillow, 0.2 inch (4 inch (4 inch (4 mm) Aluminum Seration Wheel Nut Open Type Reinforced Adjuster. Assorted [Around Chassis ] Carbon Battery Holder, Carbon Body Mount Base, Reinforced K Parts (Gear Box), Chassis Balance Weight (20g), High Torque Servo Saver, Aluminum Pillow Ball (Blue) and Hex Screws. Basic Specifications: Chassis length 12.6 inches (319 mm) (not including the body and the wheelbase: 8.9 inches (225 mm) 165mm chassis width 3 types of wheelbases 8.3 inches (210 mm), 8.9 inches (225 mm), 9.4 inches (239 mm). Frame = Front and Rear Split Monocock Type Drive system = Midship motor • Rear wheel drive Defugia = Ball Def Steering = 3 split tie rod type Suspension = 4 Wheel Double Wishbone Damper=M Chassis Big Bore Aluminum Damper Plus (Blue Cap Specification) 8 gear ratio=6.795:1-4.813:1 (5.776:1 when using 20T pinion included with kit) Speed Controller = ESC specifications (sold separately) [Items purchased separately (not included). Body for M chassis 540 type motor (brushless motor recommended), tires, RC mechanics: 2 channel proposet (transmitter, receiver, ESC, low profile servo), driving battery, charger, transmitter power supply. Chassis length = 12.0 - 13.2 inches (305 - 334 mm). The picture is the assembled kit. The body, motor, tires, RC mechanics, batteries, etc. are not included in the kit. A 0.7 oz (20 g) chassis balance weight set. This product requires power supply, but batteries, chargers, etc. are not included. The body, motor, tires, transmitter, RC mechanics, etc. are not included. Additional parts may be purchased, assembled and painted before riding. This product does not use fuel. Fuel is not included with this product. This product does not include paint, glue, oil, grease, tools, etc.

• The rear wheel drive chassis M-08 is equipped with carefully selected parts that are effective in racing, by mounting the motor to the rear with a middle ship mount to balance the traction and stability of the drive wheels
• The drive system is equipped with a ball different, and the drive shaft is universal. In addition, the low friction cross spider and lightweight aluminum swing shaft are combined with the wheel hub is made of clamp type aluminum with 0.2 inch (5 mm) thick
• The legs are used with a wide range of turnbuckle shafts for the susarms and steering systems, and the titanium coated sass shafts are also used. The M Chassis Big Bore Aluminum Damper Plus attaches to carbon damper stays is a special product with blue anodized finish on the top and bottom
• In addition, the 20g chassis weight is also included, so it is balanced in weight. Of course, it is also attractive at a reasonable price rather than having to collect the parts separately. This is a high potential chassis kit that you will enjoy racing
• Chassis length = 12.0 - 13.2 inches (305 - 334 mm) The photo is assembled with the kit. The body, motor, tires, RC mechanics, batteries, etc. are not included in the kit. A 0.7 oz (20 g) chassis balance weight set